10Gbps SFP+10G-LR

10Gbps SFP+10G-LR

The transceiver is small form factor pluggable module for serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW. It is with the SFP+ 20-pin connector to allow hot plug capability;
This module is designed for single mode fiber and operates at a nominal wavelength of 1310nm. The transmitter section uses a 1310nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825;
The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Feedback Form
Optical Device
    1. 4 corner pressure polishing fixture Opelink’ s 4 corner pressure polishing fixture is for fiber connectors and for high volume production. It’ s designed for polishing manner with planet tray.
    1. 100GHz DWDM ModuleOpelink 100GHz DWDM module is a multiplexer / demultiplexer module which is used to forward optical input signals with different wavelength into a single ...
    1. Optical Fiber Jumper, ConnectorOpelink optical fiber jumper is the optical fiber or cable with a connector installed on each end respectively to realize the jumping connection of light path for effective optical signal transmission.
    1. Single Mode Broadband Fiber CouplerFeaturing low excess loss, wide operating bandwidth and great reliability, the single mode broadband fiber coupler is increasingly used in ...